기기를 수리하세요 커뮤니티 상점

모델 A1502 / 4MB 공유 L3 캐시 2.6 GHz (Turbo Boost 최대 3.1 GHz) 또는 2.8 GHz (Turbo Boost 최대 3.3 GHz) 듀얼-코어 Intel Core i7 프로세서.

494 질문 전체 보기

옵션

Recommendation for an adhesive that doesn't instantly bond?

I am planning on mounting a new 13” LCD panel on a Mid 2014 MBP.

From what I’ve read and seen, you must execute several steps in exact order. If you skip any of them inadvertently, or misalign the panel, you must correct the problem by unmounting the panel. This is the only part of the procedure that terrifies me most as it poses a high risk of cracking an expensive panel.

Are there any double-sided tapes or adhesives available for mounting the LCD which doesn’t instantly form a high strength bond, giving you the ability to align or remove the LCD more easily, if needed?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

When I do replace the cover glass panel on the older Unibody’s I use Tesa 61395 Tape As long as you don’t press it down firmly you can still shift the glass if needed. Then, once in place I put a 5 lb weight which presses evenly across the entire surface via a cut piece of plywood covered with felt.

Tesa 61395 Tape 이미지

상품

Tesa 61395 Tape

$5.99

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기
가장 유용한 답변

옵션

I hope you are not thinking about working on the guts of a Retina display.

Here’s how to replace the display assembly:

MacBook Pro 13" Retina Display Mid 2014 Display Assembly Replacement

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 5개:

I know how to replace the assembly, but I am asking specifically about the adhesive for boding the LCD panel.

의

Review this: MacBook Pro Retina Display Teardown

I really don't recommend taking the panel apart!

의

I don't either, but what would you do with a perfectly good LCD panel with a housing in bad condition? Luckily, I removed the lcd without issue, but putting it back on is tricky, since I often skip steps or do them incorrectly.

의

What I do is slap a hard cover on it: https://www.amazon.com/s?k=macbook+pro+1...

의

@mayer It's an acceptable solution for a machine for personal use, but for refurbishing for resale, it is less than ideal. Anyway, I have successfully refurbed a dozen of these displays and they're tricky and terrifying at first, but if you're very careful and methodical, it is doable.

의

댓글 달기

귀하의 답변을 추가하세요

AppleGuyPie 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 58