기기를 수리하세요 커뮤니티 상점

AirPort Extreme 베이스 스테이션과 함께 출시된 이 하드 드라이브 장착형 제품은 Time Capsule NAS에 802.11ac 속도를 제공합니다.

56 질문 전체 보기

옵션

Is the cable next to power supply plug required?

Hello,

I was disassembling my Time Capsule in order to fix the fan issue and thought I unplugged all of the cables following the guide but missed one, a 2 wire plug which clips in on the board right above and to the left of the wan plug

Block Image

and looks like it was soldered to a small clip on the case next to where the power supply socket goes labeled 4315C

Block Image

I am not sure what the use of this is as I don’t see a button or anything corresponding to it, nor any clip referencing it. Before I put it all back together, is this needed to operate? can’t find any information on what this does.

Thanks in advance.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

You lost the reset button which is a small hole by the power plug that you can hit with a paper clip.

While the unit will work without the reset if you need to reset the unit it will be tricky as you’ll need to short the pins on the header.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 2개:

Thank you. Do you know if those wires are + or - like on some motherboards, if I can find a way to solder it back on, not sure which wire goes to left or right, I know the plug has a very small 4 and 6 where two wires go into it. If it is just completing the circuit it probably shouldn't matter, but this is apple, so want to make sure. Thanks again.

의

Switches tend not to have a polarity. When they are mounted in a metal case it might. Here its plastic and has none.

의

댓글 달기

귀하의 답변을 추가하세요

Nathan Truhan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 61