주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기
질문 마감됨

Replaced iPhone 3GS digital display but still have white screen

I dropped my Iphone 3GS on the floor and the display shows a white screen. Nothing appeared wrong with the display, no cracks, etc. I replaced with a new Iphone 3GS display assembly but still shows a white screen. Is the logic board the problem?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 1개:

Try a Reset, hold both Home and Power buttons until iPhone restarts on its own.

댓글 달기

답변 2개

Pull it apart again and make sure all connectors are tight and all the way clicked in. More often then not, they get loose when you put it back together.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

This is usually a sign of a bad lcd (the screen under the glass). If you do replace it, be very gentle with the front of the screen as the liquid contained inside will hold finger pressure and it will be noticeable when re-assembled

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 874