주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

apple logo then blue screen

so, i plugged my iphone to a wall charger and let charge overnight, but in the morning i tried to turn on the device and it shows apple logo then a blue screen, i tried to connect it to my computer by dfu mode but it says usb device not recognized, so i opened the device and unplugged the battery connector and the blue screen disappeared, it started to loop the apple logo without the blue screen

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

someone answer me please

댓글 달기

답변 1개

가장 유용한 답변

Hello

did you have recently change the iphone screen ?

It looks like a screw damage due to the exchange of screw length during reassembly. If it is this, then you may have damaged the mother board. In the past some microsoldering shop could repair this but i don’t think it worths the cost now.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

no i did not change the screen when it happened the phone was un-opened

I agree with that, usually the blue screen leads to either a long screw damage or possibly a Nand issue. In any case the conclusion is the same, not worth anymore the cost of microsoldering repair on a 5S.

댓글 달기

귀하의 답변을 추가하세요

mike tyson 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 48