주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기
질문 마감됨

Screen is completely white

My iPhone 3G got wet and I dried it for days in a bag of rice. Eventually it started working again and I managed to have iTunes recognize my iPhone once more. I restored it and now the phone works again. Calls, texts etc. all come in, but the phone now has a bright, white screen. Underneath I can make out the clock and all the symbols, and it recognizes my finger gestures instantly, but the screen remains bright white with gray horizontal lines/flickerings. I opened up my iPhone yesterday and checking the number 1, 2 and 3 cables didn't resolve the issue. Would this be an LCD problem or can someone tell me what to do?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

Try replacing the iPhone 3G display to try and solve the issue.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

I have the same issue with my iPhone. It has been dropped on the ground and then dropped in water. I replaced the LCD and digitizer but the screen is still bright white. The phone still works, I can make calls and use the touchscreen. The only problem is that the screen is completely white. If I hold the screen at an angle I can see the image which is very faint.

The problem can't be in the LCD. I'm wondering if anyone has an idea on how I can try to fix tis.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

The logic board is most likely fried where there LCD connects to the board.

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,603