평판: 31
2
1
Recently I upgraded my iMac, so I replaced the thermal paste and the hd, and I put a nvme m2 in. Now my fan runs at 2000 rpm, earlier it ran at 1200 rpm. I didn’t put any thermal sensor onto the hd. My iMac is a iMac14,2, so 27” late 2013. Do I really need the sensor as Macs fan control sees the hd’s one?
좋은 질문 입니까?
평판: 685.3k
3.4k
1.1k
2.6k
If you replaced the original hard drive with a standard spinning disk drive, you need the OWC In-line Digital Thermal Sensor for Hard Drive Upgrade for 27" iMacs 2012 and Later
해당 답변은 도움이 되었습니까?
So I would need it even if the fan isn’t raging at full speed?
I don’t understand why I should buy it since the fan only runs at 2000 rpm, not the max 3600 rpm
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 61
