주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2687 질문 전체 보기

iPhone wont turn on after screen and battery replacement

backstory on iPhone: I dropped my phone a few weeks back and the screen smashed and touch stopped working I was using another phone as a replacement and let the broken phone die when I tried to charge it to turn it on there was no sign of life not even red battery logo. I have just changed the screen and battery and the phone will not turn on.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

It’s either a replacement parts issue or a logic board issue. When repairing devices, it’s important to have good quality (preferably known-good) replacement parts. Does the phone have the same symptoms with the original screen and battery? If so, then it may be a logic board issue that was caused by the drop.

해당 답변은 도움이 되었습니까?

점수 2
댓글 달기

If you only have a screen problem, you should be able to turn on the phone and use the mute switch a few times to see if the phone vibrates.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

eimearw565 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 30