주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

2017년 9월 22일에 출시된 Apple 스마트 워치 3 세대, 셀룰러 연결성 옵션 포함.

158 질문 전체 보기

Does the LCD flex cable require micro soldering if it's damaged?

It is my first time attempting to replace the screen on an Apple watch altogether, and I tore off the LCD Flex cable, unfortunately, from what I am reading, I think it requires micro soldering…..does anyone know if this is correct? I sure hope not :(

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 2개

가장 유용한 답변

Yes this piece does require micro-soldering to replace.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Thanks so much! Unfortunately for me, that means I have to find a micro soldering tech to do the work for me :( Oh well, either that, or I just buy a new watch, they only run about 150 now anyhow, that’s probably what I will do, and use this one to mess around with and learn with, I appreciate your response!! I honestly never realized people actually answered you on these forums, I will definitely be using this much more often!!

의견 추가하세요

@iphonefanatik - Hold on here! If you’ve damaged one or more of the three cables that go from the SIP to the display assembly as seen here

Block Image

You’ll need a new SIP module as the cables are not available as a spare and you likely damaged the SIP logic board! As an example the iFixit team damaged their watch during the teardown! The two blue ovals are torn cabled one is lifted and the other fully ripped off.

Block Image

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Rachel Kelley 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 10

전체 시간: 195