주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

4098 질문 전체 보기

Screen malfunctioning after battery replacement

Phone was working fine except the battery drain was high. Followed directions and replaced the battery. Now there are vertical lines on the screen and it’s not responsive to touch. Any suggestions?

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Suspect improper flex cable seating(s) especially the digitizer (touch) flex cable. Maybe review your reassembling procedure to make sure you didn't miss anything.

https://www.imore.com/how-replace-batter...

의견 추가하세요

답변 1개

가장 유용한 답변

Hi, I have personally replaced my own iPhone 5S battery and from the sounds of what you are experiencing, there could be two problems. The first is when you re-attached the ribbon cables for the screen that you didn’t seat the cables into position properly, if this is the case, then you may have to open your phone again to check the cables. The second thing that may have happened is screen damage. To much pressure on the screen when the phone is open can cause damage to the display. If the screen is warped or bumpy then it is most likely a broken screen. Any more details and I will be willing to assist.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

susan smittkamp 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 26