주요 콘텐츠로 건너뛰기

The Wi-Fi only version of Apple's iPad 6, released in March 2018. Available with 32 and 128 GB storage options. Features a 9.7" Retina display and 64-bit A10 fusion chip.

24 질문 전체 보기

Fingerprint sensor not working correctly after screen replacement

Hey guys.

Just replaced my first one of these & I took extra special care when I got to the home button assembly.

I thought all was well but customer has just contacted me its not recognising finger prints.

Normally when home button is damaged you get Touch ID not working or failed message but I got none of that client face timed me to show me & they can go into Touch ID & passcode & add fingerprint they even get to the place finger on button part with the blank fingerprint but when they touch it on nothing happens normally you would get the red lines as it adds the fingerprint but they’re getting nothing.

Any ideas guys cheers?

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

Hi @inthebox

You can recommend a hard reset (holding the home and power button) and a software reset to fix the issue. Most likely this problem is caused by a small amount of damage to the home button cable.

If nothing is able to bring the Touch ID back, the device will need to be swapped out of warranty by Apple.

Best of luck!

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Kenny Leonard 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 17