주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Are these the correct parts to replace the 6S+ rear camera lens

Does this part include the actual glass lens (or is it just the metal ring) and i assume I need an adhesive ring, this part?

If these are not the correct parts to replace a cracked 6S Plus rear camera lens please point me to the correct stuff.

Also can the lens be replaces from the outside with a heat gun (some you tube videos indicate it can)

iPhone 5 to 6s Plus Front Camera Gasket Pads 이미지

상품

iPhone 5 to 6s Plus Front Camera Gasket Pads

$0.99

iPhone 6s Plus Rear Camera Lens Cover 이미지

상품

iPhone 6s Plus Rear Camera Lens Cover

$4.99

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

the framing is “spot welded” onto the frame of the device. You can remove it but the trick is finding something strong enough to hold the new camera lens in place with regular use.

or you can remove just the glass lens if your lens frame is fine. I don’t recommend trying to do this without removing the rear camera however as a little bit of glass can fall onto that camera lens, scratch it, and make it so you have to buy a new one.

해당 답변은 도움이 되었습니까?

점수 0

댓글 3개:

Doe iFixIt sell the glass lens? I don't see it.

How do I secure the lens?

some kind of adhesive. b-7000 works well. or you could probably use some kind of epoxy maybe. just make sure not to use a whole lot of whatever you use as you don't want the glue to spread out to the lens or camera.

not sure if ifixit sells the glass lens or not

I just ordered this from Amazon and it comes with the adhesive ring

https://amazon.com/gp/product/B077M9K4Y6...

댓글 달기

귀하의 답변을 추가하세요

Jack 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 48