기기를 수리하세요 커뮤니티 상점

2012년 6월 출시 / Core i7 프로세서 Turbo Boost 포함 / 최대 1 GB DDR5 비디오 RAM

596 질문 전체 보기

옵션

MacBook Ran Out of Battery, then chargers stopped working!

Hi,

I’ve had my mid-2012 15 inch unibody Macbook Pro since 2012 and it’s been a champ, withstanding daily use of up to 7+ hours. Only issue I ever had with it was a wifi ribbon that needed replacing a year ago. Yesterday night, I was busy working and lost track of the charge and it died. Plugged it into my charger, but the charger light wouldn’t come on and there was no evidence that it was charging. Not to worry, I had another charger and tried with a different outlet. This charger’s light blinked green three times before going dark again. Still nothing. I unscrewed the bottom and disconnected the battery before trying to plug it in and power it on, but still nothing. I’ve run the laptop before with the battery cable out so this gave me pause. My concern now is that its either an issue with the magsafe port or the logic board, and I’m praying its not the latter as I leave for an overseas trip in two days and need my laptop to do work there. As a result of the battery being drained, I can’t do an SMC or PRAM reset and can’t run any diagnostics. Any advice would be appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

With the green light blinking and it not charging my first suspect is the Mag-Safe board. Here’s how to replace it:

MacBook Pro 15" Unibody Mid 2012 MagSafe DC-In Board Replacement

해당 답변은 도움이 되었습니까?

예 아니요
점수 3
댓글 달기

옵션

The 3 blink MagSafe is telling your battery is no longer working. You’ll need to replace it MacBook Pro 15" Unibody (Early 2011-Mid 2012) Battery and here’s the guide MacBook Pro 15" Unibody Mid 2012 배터리 교체

MacBook Pro 15" Unibody (Early 2011-Mid 2012) Battery 이미지

상품

MacBook Pro 15" Unibody (Early 2011-Mid 2012) Battery

$89.99

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 5개:

Just to clarify the three blinks are spread out over ten seconds or so and I can't boot with the battery unplugged from the logic board. Shouldn't it still boot if it's only the battery being the issue?

의

If you had a newer retina model then you can but the older Unibodies need the battery.

의

I ordered a new magsafe board which should be arriving today. Checked the internals out yesterday and the battery is visibly in ok shape. No bulging or damage to the cord. The magsafe board on the other hand had what looked like rust on some parts of the board. I'm thinking that's the culprit. The battery didn't just give out randomly, it died at 0% and when I plugged it in at 1% to try and charge, no charger light came on and it didn't recognize the charger. The magafe board's port to the charge is also worn and has a crack.

의

While the battery may look OK it's getting long in the tooth. Batteries also wear out. The Blinking LED is the battery needs service warning. If you can get your system to boot up you'll see the bad battery icon symbol.

의

I replaced the DC in board myself last month and it started working fine again. Ran diagnostics on the battery and coconut battery says it’s at 86% health.

Today I have the same problem. Computer ran out of charge as I was using it out of the house and it won’t charge anymore with the same blinking lights issue.

의

댓글 달기

귀하의 답변을 추가하세요

Dan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 526