주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2498 질문 전체 보기

Front camera not working after battery replacement.

As the titles says. The proximity sensor and speaker still work. I remember disconnecting the battery before I took the screen off to replace the battery. I’ve also replaced the front camera and the problem still persists.

Any help is appreciated. Thanks :)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 1개

가장 유용한 답변

Try to replace with a new front camera. Maybe the camera was damaged during the replacement of battery. Sometimes, it happens that the battery supply input was touched to the other part of your phone and it happens that it goes to your camera and damage it. I have tried it to my other costumer with same problem.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

But I’ve already replaced it, could I have damaged the logic board?

Yeah.. But that is the worst case.

What do I do then? Since I’ve already replaced it and it still doesn’t work does that mean I have to get a board level repair? If so where should I get such a repair? I’m in Australia if that helps

댓글 달기

귀하의 답변을 추가하세요

Ryley Windmill 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 108