Kenmore Series 500 Washer drains, doesn't automatically spin
I have a Kenmore series 500 washer. For the past month, it has began to stop automatically progressing to the spin cycle. When I set the dial to regular or heavy load, it begins normally, lid locks and it senses, fills and washes. It will rinse and drain, but will sit on spin (green light indicates spin), the lid is not locked and it will not do anything until we cancel it, manually move the dial to drain/spin and push start. At this point, it will then spin (sometimes after performing Morse code on the buttons to get it to do something.
The lid will lock when beginning a cycle, and I notice it locks and unlocks normally, except for when it is time to spin.
I have complete the motor reset procedure (unplug, raise and lower lid 5x).
Any ideas?
Thanks in advance.
Model number in the manual is W10468340B ( I believe this is the model number)
좋은 질문 입니까?
댓글 5개
Please give us your model number
mayer 의
Added. W10468340B
Bryan S 의
W10240534 was on the back. The first model number was found in the manual.
Bryan S 의
Does anyone know the part number for the lid lock? I have searched but cannot find the exact part number. I have two model numbers: W10468340B which was on the manual, W10240534 was on the back of the washer.
Bryan S 의
I have a Kenmore series 500 washer.it doesn't have a agitator. Can I put one in it
John Jokela 의