주요 콘텐츠로 건너뛰기

Fix Your Stuff

Right to Repair

Parts & Tools

모델 A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 또는 2.8 GHz Core i7 프로세서

399 질문 전체 보기

Is there a way to get a Spontaneous Boot

Machine would not power up, got green LED on #1 with old PSU.

Just replaced PSU with one from iFixit and get the same thing.

Are there any power pads to jump? Have not replaced the display yet.

Apple iMac "Core i5" 2.5 21.5-Inch (Mid-2011) Specs Mid-2011 - MC309LL/A - iMac12,1 - A1311 -  2428

@danj

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

선택된 해법

Try the power switch, short across the header on the logic board.

To locate it jump to Step 30 iMac Intel 21.5" EMC 2428 Logic Board Replacement

Update (10/28/2019)

@mayer - Check the voltage on the logic board. In the upper middle you’ll find this set of pins of the power supply connection.

Block Image

J600

1 PP12V_G3H

2 PP12V_S0

3 PP12V_S0

4 GND

5 GND

6 GND

해당 답변은 도움이 되었습니까?

점수 1

댓글:

@danj I had another one of these for parts, tried to pull the power button (no going as it is attached to the frame to well), cut the cable to get the logic board insert. Plugged it into the board, plugged the machine in and completed the circuit by shorting the wires. Got nada. Any ideas on what this could be other than a bad power supply?

@mayer - Did you check the voltages going to the logic board?

@danj what are voyages? If you meant voltage, do you know what they are supposed to be? No I have not checked them, but will.

@mayer don't you drive your Chevy Volt on voyages ;-} Sorry typo

@danj tried three power supplies now, all give #1 green LED. Jumped the start button. I get nothing. Any ideas?

2에 댓글 더 나타내기

의견 추가하세요

귀하의 답변을 추가하십시오

mayer 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 3

전체 시간: 56