평판: 1
1
I have a 2008 Mac Pro that I’m trying to install Samsung 860EVO SSDs in. They are recognized over USB in a dock, but I’ve yet been unable to get them recognized when plugged into the SATA ports. A Toshiba spinning drive works just fine over SATA.
Does anyone have any experience with this? EFI update is current. Could it be the SATA cables?
좋은 질문 입니까?
평판: 685.3k
3.4k
1.1k
2.6k
Format it GUID in your dock and you should be fine. I have had no problems with these dives in both my 2008 and 2009 Mac Pros. What system are you running?
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 89
댓글 3개
Are you using the original drive frame (3.5" drive) or using the needed 2.5" drive frame?
Are you trying to setup a RAID set?
Dan 의
No RAID. Just accessing it directly mounting it in a drive frame.
dinomeneghin 의
Running Yosemite 10.10.5.
I’m able to install Yosemite on the SSD, and it shows up as a Startup Drive in System Prefs. Can’t boot from it, however, and it doesn’t show up *at all* when connected via SATA.
Journaled HFS+, GUID...
Am I missing something stupid?
dinomeneghin 의