옵션

Digitizer replaced, now charging and reboot issues.

Hi fellow techs,

I need a little help. The digitizer was replaced on my wife’s IPad 6 generation. I am having charging issues along with reboots. When plugging the tablet in, shows charging @ 62%, after 4 hours of charging it will go no higher than 62 %. When I unplug the tablet the battery level drops to 1% , if does not reboot, it will show battery level at 58%. You plug it back in it shows 62%. Any thoughts or suggestions would definitely be appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

게시일: 2019년 10월 29일

옵션

Problem most likely is if the battery was disconnected from the logic board using the thin card method it is probably just some debris blocking the connection between the board and the battery.

You’ll need to clean up and reseat the connection of the battery connector which most of the time will fix this. I personally lift up the connector a bit with my nail with just enough space to have a soft bristle brush with 99% isopropyl alcohol on it to clean the connector gold contacts.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 달기

iPad 6 Wi-Fi

Digitizer replaced, now charging and reboot issues.

답변 1개

귀하의 답변을 추가하세요