옵션

Areas of screen unresponsive to touch after screen replacement

I am just about done with the iPad 6 Wi-Fi Front Panel Assembly Replacement procedure. The LCD is screwed back in with the new touchscreen connected. I turned on the iPad to test the touchscreen (before final step of removing adhesive strips and securing touchscreen down).

Home button works fine - iPad lights up and when I go to enter my code, the 4, 5, 6, 7, 8, 9, and 0 all seem to work but the 1, 2, and 3 buttons do not respond to touch. “Delete” and “Cancel” text buttons both work.

I am able to power down (by sliding across the top of the screen) fine. Tried a hard reboot but same issue persists.

Is this a problem with the iFixit replacement screen or could there be another issue?

Thanks.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

게시일: 2019년 12월 4일

옵션

Oh yeah I get this a lot with my iPad 6 screens just disconnect the screen cables and reseat them. For every one I do I plug them in two times to make sure.

I'm not sure why but with first click in it sometimes has dead spots on touch but when I reseat it is all working fine. Make sure to push down a bit harder than usual on each ends to make sure they are fully clicked into connector.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 2개:

Thanks! I will try this and report back!

Matthew Wilson 의 2019년 12월 5일

Belated update: this fixed it - thanks!

Matthew Wilson 의 2020년 1월 7일

댓글 달기

iPad 6 Wi-Fi

Areas of screen unresponsive to touch after screen replacement

답변 1개

귀하의 답변을 추가하세요