주요 콘텐츠로 건너뛰기

The Dell 1710n is an office laser printer released in 2011.

8 질문 전체 보기

How to remove white 'scuff'marks on print jobs?

Had no problem until this week - my 1710 printer is not printing clearly, there are scuff marks that repeat in 'white cloud' shapes down the page in regular intervals. I have pulled out the printer catridge etc and have wiped out excess toner internally via the front panel. Is this problem caused by a piece of paper stuck on the rollers ?? The dell toner cartridge is hardly used, as new.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 해법

This is usually caused by a scratched drum. If not, then you exposed it to too much light or you exposed it to light or touched it.

Usually light damage is permanent. You probably need a drum at that point. However, if you let it sit in the printer and not use it, it may recover. It probably won't, but it does have a chance. It's better then assuming a drum dead and that's like 50-60.00 to replace dead. Scratches are always cases a drum rebuild or a new drum is required.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Johanna 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 11

30일 전: 14

전체 시간: 1,150