주요 콘텐츠로 건너뛰기

Released June 2017, the iPad Pro 10.5" replaces the 2016 iPad Pro 9.7".

118 질문 전체 보기

Is there a good way to ensure adhesion to frame near charging port?

I was recently put on the task of repairing a bunch of broken iPads at work and so far the iPad 10.5s have been the biggest struggle. The primary issue I've been running into is a roughly 2 inch width region of the screen seems to not adhere to the frame above the charging port. I've been using a Prime Tech Tools mobile repair vice to apply even pressure to the screen, as well as Tesa tape and adhesion promoter. The rest of screen/frame mount points adhere brilliantly, it's just the one spot causing trouble. Any advice or a point in the direction of a guide that may address this more closely would be greatly appreciated.

N. Batson

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

Most screens have an adhesive that has to be heated to a certain temperature with a heat gun to adhere properly.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Unfortunately this doesn't seem to be the issue, I've been applying heat with a heat gun prior to clamping the device to no avail.

Thanks for the help,

N. Batson

의견 추가하세요

귀하의 답변을 추가하십시오

akwonder1 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 25