주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기

Ringer & Speaker Phone doesn't work

What works: headphones, main speaker for calls, & mute switch

What doesn't work: speaker phone & ringer

I have rebooted the phone and nothing. I am getting ready to replace the display assembly and while I am at it I thought I might as well fix the ringer, if possible.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 3개

가장 유용한 답변

Okay, before you go replacing parts you need to figure out what parts are actually causing the fault. By "Main Speaker" i am assuming you mean the "Earpiece Receiver" that you listen through for incoming/outgoing calls? If that part is working and the digitiser (screen) is not faulty/intermittent/damaged then i don't think you will need to replace it.

Both the speaker phone and ringer come out of the same part (speaker located bottom left of iPhone), and if they are faulty then you will just need to replace the Dock Connector Assembly (includes a new Dock Connector, Speaker and Microphone). Here is a link to the part, here is a link to the repair manual.

Hope this helps! :)

iPhone 3G Dock Connector 이미지

상품

iPhone 3G Dock Connector

$9.99

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

The loud speaker on the iPhone, which does both phone calls and ringing, is a part of the dock connector.

iPhone 3G Dock Connector 이미지

상품

iPhone 3G Dock Connector

$9.99

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Hello, I have identified the problem on my iPhone and it is that the speaker needs to be replaced. Can i do that without replacing the entire dock connector? because everything else works okay.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

larryd 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 3,153