주요 콘텐츠로 건너뛰기

2017년 9월 22일에 출시된 Apple 스마트 워치 3 세대, 셀룰러 연결성 옵션 포함.

196 질문 전체 보기

Apple watch 3 : No touch after screen remplacement

Hello,

I’ve replaced my apple watch 3 GPS screen assembly, and got no touch.

I’ve tried force restart, cleaning the connector with Iso Alcool.

But I’ve notice a sticker broken on the bottom half of the ribbon cable.

Or do you know hos to diagnostic a broken cable ?

Thx!!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 3개

Have you contacted apple support

No because i replace it myself, so Apple won’t help me.

Did you ever find a solution? I have the exact same problem.

댓글 달기

답변 2개

가장 유용한 답변

If you have a torn ribbon cable it is game over. The black tape broken is not a problem. I have documented my own problem with no touch after replacement and had to reseat the ribbon cable in the display screen connector for touch to work.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Thanks for your answer!

The ribbon cable is slightly bend but not torn, so i suppose it's not that.

And i tried to replug it using your guide, no change.

It their a special way to plug the middle ribbon ?

댓글 달기

Have you removed the battery before replacing the LCD. If not, remove the battery first and with display connected and press the power to remove any static charge in the components. It could give a chance. Careful while removing.. Don’t use too sharp objects as spudger and double check the battery connector while replacing.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

I just tried it and it doesn't work either.

I don't understand, nothing look damage or missing....

댓글 달기

귀하의 답변을 추가하세요

freyjamir 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 4

전체 시간: 733