주요 콘텐츠로 건너뛰기

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

Charging problem after LCD and Dygitizer change, no auto-dim,bat drain

So I cracked my screen and replaced it, right after I noticed that the unit is getting odly warm and battery drains verrrrry fast,(10% in 5 min) that is not normal... also when I make a phone call and talk the screen is always on and the auto dim light doesn't work. I disabled 3G, Data, Vibrate, Dimmed light to 10%, disabled notifications and location, airplane mode... SAME ISSUES :S.... Please give me some hints....

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

If the screen lock isn't working when youre in a call, then the proximity sensor is bad. You damaged the ribbon during replacement of the screen or you received a bad one. This could easily cause the battery drain. Try disconnecting the ribbon and see if it show similar symptoms (other than the proximity sensor not working). If so, replace the ribbon

iPhone 3GS Proximity Sensor Ribbon Replacement

해당 답변은 도움이 되었습니까?

점수 4
댓글 달기

귀하의 답변을 추가하세요

NIck 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 787