옵션

Help identifying missing component on iPad Pro 10.5"

Does anyone know what the component is in the attached pic? The marking on top is N6. I think it may be related the gas gauge? I can’t find a similar looking component on some of the spare boards I’ve got lying around. I looked near the battery connector on the Air 1 & Air 2 but I don’t see anything that appears similar. I’ve got 3-4 boards all . missing that component and all of them are bootlooping

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

게시일: 2020년 1월 11일

옵션

While there is no schematic for this device, the pad pattern is clearly one of a MOSFET. Based on this, there is a very high probability that using an iPhone 7 / Q2102 MOSFET will do the trick. You can salvage one from a dead board or order them new from DigiKey/Mouser (PN# RV3C002UN).

해당 답변은 도움이 되었습니까?

예 아니요

점수 4

댓글 1개:

Thanks Minho

butterfries 의 2020년 1월 11일

댓글 달기

iPad Pro 10.5"

Help identifying missing component on iPad Pro 10.5"

답변 1개

귀하의 답변을 추가하세요