주요 콘텐츠로 건너뛰기

2017년 11월 4일 출시. A1865, A1901. GSM 또는 CDMA / 64 또는 256 GB / 은색 또는 스페이스 그레이. ("iPhone 10"으로 발음합니다.)

1196 질문 전체 보기

No cameras or face ID after screen replacement on iPhone X

Hi All,

I replaced the screen on the iPhone X and now the cameras (front and rear) and face ID don’t work. The camera app is black when I open it. It shows the white button and last photo taken.

I don’t see any damage to the flex cable or connector on the board.

I’ve tried multiple other cables with the same result.

I reset the settings and updated it through iTunes.

I put the original flex back on the original screen and same result. I am not sure if face ID or the cameras were working before the repair. I normally check what is working and what isn’t, but I forgot to this time.

Do I need the device that copies the information from the old screen? Is that something that is just required now? If so, is there a solid option/place for that?

Any suggestions are greatly appreciated!

Thanks

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

Last I recall FaceID didn’t get disabled when you replaced the screen on the X. Make sure you put the correct screws in their correct location. I’ve seen a video posted on STS Telecom’s channel on youtube with an issue like this where a screw was put in the wrong place and completely ruined FaceID and camera functionality. https://www.youtube.com/watch?v=0RvXF_Vf...

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

It turns out it was an issue with the power chip on the board and needs to be replaced which requires micro soldering.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Mitch 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 98