3GS Camera Shutter Wont Open(keeps clicking)

Question

iPhone 3GS

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

Joe @joe20183

평판: 1

2

5

게시일: 2011년 8월 19일

옵션

3GS Camera Shutter Wont Open(keeps clicking)

Hi there i have an issue with my 3GS 32GB camera the shutter wont open, Ive changed the camera 4 times and also micro soldered a new FPC camera connector. Also ive restored many many times. I know for a fact its a hardware issue.

But still the same issue, any fuses or components i should be looking for to replace?

Any help would be great.

Thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

선택된 답변

hectordtruong @hectordtruong

평판: 7.4k

15

5

10

게시일: 2011년 8월 29일

옵션

My best guess is that the camera connector is no longer good. A new board connector replacement is not the best thing to do. Comparing a human solder joint to a machine, the machine's joint is always tighter, and better. Unless you know for a fact that the connections are tight, I don't think it is a solid repair. Could you post pics of it?

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 5개:

Believe me it's a solid repair, I've done both LCD fpc and connector 3

All points have been tested

Any other ideas?

Joe 의 2011년 8월 29일

Any inductors or resistors missing perhaps? I can't think of anything that would stop it from working other than a hardware issue either. My guess is as good as yours then. I'd really like to know as well if you do find something though.

hectordtruong 의 2011년 8월 30일

All points are tested believe me it's a beautiful repair

Any ideas?

Joe 의 2011년 8월 29일

nothing missing, i also check with another logicboard and tested all the components around the Camera FPC.

Im clueless i think the motherboard is slightly bent in that area, maybe from a pregnant battery from water damaged. Maybe there a trace broken inside of the motherboard is my best guess.

Who knows

Joe 의 2011년 8월 31일

maybe oldturkey will have the schematics for 3gs..then you can check out which chips are responsible for your camera, otherwise you'll be looking for a needle in a haystack. if the board is slightly bent in that area you could take the plastic wrap off the back and take a look at the dark blue lines near the bend...they should be the plastic cover over the trace..scrape off the dark blue line,follow from camera to bend and look for breaks then re-tin/solder to fill any break you find.

pollytintop 의 2011년 9월 1일

댓글 달기

Believe me it's a solid repair, I've done both LCD fpc and connector 3

All points have been tested

Any other ideas? — Joe
Any inductors or resistors missing perhaps? I can't think of anything that would stop it from working other than a hardware issue either. My guess is as good as yours then. I'd really like to know as well if you do find something though. — hectordtruong
All points are tested believe me it's a beautiful repair

Any ideas? — Joe
nothing missing, i also check with another logicboard and tested all the components around the Camera FPC.

Im clueless i think the motherboard is slightly bent in that area, maybe from a pregnant battery from water damaged. Maybe there a trace broken inside of the motherboard is my best guess.

Who knows — Joe
maybe oldturkey will have the schematics for 3gs..then you can check out which chips are responsible for your camera, otherwise you'll be looking for a needle in a haystack. if the board is slightly bent in that area you could take the plastic wrap off the back and take a look at the dark blue lines near the bend...they should be the plastic cover over the trace..scrape off the dark blue line,follow from camera to bend and look for breaks then re-tin/solder to fill any break you find. — pollytintop

iPhone 3GS

3GS Camera Shutter Wont Open(keeps clicking)

답변 1개

귀하의 답변을 추가하세요