기기를 수리하세요 커뮤니티 상점

2016년 9월 16일 출시. Model 1660, 1778. GSM 또는 CDMA / 32, 128 또는 256 GB / 로즈 골드, 금색, 은색, 검정색, 칠흑색으로 제공됩니다.

2264 질문 전체 보기

옵션

Home button no return to home

I have a IP7 with no Touch ID or home button working.

I changed for a JC home button yet I get no response with single click/return to home or long press. There is also no response through home button settings.

The only response I get is from double click with half screen. I tried another JC home but still have the same problem. The buttons work ok in another IP7. I did get a message flash up once that the home button needs servicing as I was tired and dumb enough to leave the battery connected but haven’t seen that since.

I tried a dfu restore through iTunes. Could I rollback IOS through 3utools? Would this help?

Any help guys please as I’m baffled

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

There may be some damage to the screen, specifically the flex that runs underneath the heat shield and connects the actual Home button to the logic board. Seeing as how you have two devices, try the working screen/Home button combo on the first device to see if that solves the problem.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

Thanks Minho. I tried your idea with a working screen and working JC button yet still only get the double click option. The odd thing I noticed, is when I unchecked ‘reachability’ in accessibility options, the JC home did not respond to double click either. Not sure what’s going on and don’t want this phone left with just the ‘virtual’ home.

Edit to add: noted battery stated in need of service and no battery health was available which is the apple lockdown in the XR etc. I’ve managed to get that all sorted but I wondered if this home button issue could be anything to do with an old lockdown?

의

댓글 달기

귀하의 답변을 추가하세요

Remee 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 45