주요 콘텐츠로 건너뛰기

MacBook Pro 13" Retina Display, 모델 A1502의 2015년 3월 업데이트는 5세대 Intel Core i5 및 i7 프로세서를 포함하며 Force Touch 트랙 패드를 소개합니다.

1185 질문 전체 보기

One screw just came out and won't screw

The other day I heard something falling and I noticed it was a screw from the bottom of my macbook, and when I tried to screw it, it rotates, however it will not hold… This is weird because nothing happened to my computer… What should I do?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

It seems like maybe the screw mount has failed on you where the screw usually seats to hold the back cover on. I have had luck using a small amount of hot glue on the underside of the screw applied with a toothpick, simply to plug that hole and avoid dust and other particulate having easier access to the inside of the case. Otherwise, if all your other screws are intact, it should not be much of an issue for you. This is intended to be a cheap and quick fix though, and if it concerns you a lot, other solutions may be required. In the case of an apple laptop… replace the chassis?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

kraki 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 73