주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1158 질문 전체 보기

Why can't I turn the phone on?

I took the front off of the phone to place the 1 tab back into position as I was getting a white screen issue. After putting the phone back together I couldn't get it to turn back on. I didn't even fully take it apart, only lifted the screen long enough to put the tab back into place. Any suggestions?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 12
댓글 달기

답변 6개

가장 유용한 답변

check that the lock-switch connector is on fully, as there may be no hardware failure, but somthing preventing you from turning it on.

해당 답변은 도움이 되었습니까?

점수 2

댓글 3개:

Where is the lock-switch connector?

Where is the lock-switch connector located?

Om the right corner o.

댓글 달기

i think my phone have hardware problem

Update

please show me phones diagram

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

gayan, it would work so much better if you ask your ow Click on the link on the right side of this page. "Ask a question" and give as much detail as possible.

댓글 달기

my samsung s4 is not working it fell the screen cracked and the mother board not working i cant switch it on

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

wen i turn un my phone it stop by the starting tone

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

why cant my phone turn on

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

My G3 Phone can not on

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

My G3 Phone can not on

Please what shall I do?

댓글 달기

귀하의 답변을 추가하세요

shannon 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 4

전체 시간: 1,978