해결됨: What is the best way to clean the logic board on a MBP early 2011? - MacBook Pro 13" Unibody Late 2011

What is the best way to clean the logic board on a MBP early 2011?

I don’t have the technical skills for starters. However I recently replaced the hardrive cable following the Ifixit detailed instructions and it worked. While i have it opened I noticed loads of dust on the logic board but not sure how to clean it without damaging it.. Thank you in advance

게시일: 2020년 5월 7일

옵션

I use a small soft paint brush and a can of can’ed air. carefully brush the surfaces to loosen the stuck dust, use the can of can’ed air to push the debris away.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 5개:

Thank you for your prompt response. One further question, does any can air can be used used? I read something about that some might provide static electricity. Thanks again

Gustavo Gomez 의 2020년 5월 7일

@gustgo Canned air can be used. Just don't use a vacuum because that will cause static electricity to become a problem.

TheLoneGamer 의 2020년 5월 7일

Thanks a million

Gustavo Gomez 의 2020년 5월 7일

Can'ed Air won't, Vacuums do!

Dan 의 2020년 5월 7일

@danj thank you, greatly appreciate the advice

Gustavo Gomez 의 2020년 5월 7일

댓글 달기

MacBook Pro 13 "Unibody Late 2011

What is the best way to clean the logic board on a MBP early 2011?

답변 1개

귀하의 답변을 추가하세요