주요 콘텐츠로 건너뛰기

27" 화면 2560 x 1440 픽셀 해상도 Thunderbolt 및 MagSafe 케이블 부착물

160 질문 전체 보기

Green display on turn off, clearing after 10-15mins

I have had my thunderbolt display for a while and no issues until one day it seems to click, and the green appeared.

After about 10-15mins it disappears and the screen is back to normal.

The green is all over with what looks like some image persistence at the sides.

I have stripped the display back but could see anything obvious then wasn’t sure what to look for. I gave everything a clean with a blower, a long shot but no joy…

Any advice welcome.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Try cleaning the connections with a qtip and alcohol and a soft brush, there might be corrosion just from the humidity in the air.

Update (05/21/2020)

If you open it up it should have a connection where you can change the screen.it should be internal. I use Rubbing alcohol as high of a percent of alcohol.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Hi Allan, thanks for coming back. Which connections? And what alcohol is best?

Done and unfortunately no change...

댓글 달기

귀하의 답변을 추가하세요

James 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 34