주요 콘텐츠로 건너뛰기

닌텐도 스위치는 도킹 스테이션을 통해 TV에서 플레이하거나 이동 중에도 플레이할 수 있는 휴대용 게임 콘솔입니다. 2017년 3월 3일 출시되었습니다.

702 질문 전체 보기

Desoldering question regarding ic chip

So this is more of a soldering related question. The ic chip on my switch is bad so I've attempted to desolder it.

What I've noticed is that it takes a REALLY long time to get the stupid chip off.

Heat gun was set at 360 degrees Celsius and I've added flux too and it took me like 8 minutes before I just gave up

Is it supposed to take longer than 8 minutes or what? Any tips would be appreciated. Thank you

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 1개:

Cristian Tavarez what does that chip look like? does it have underfill?

댓글 달기

답변 1개

It should never take 8 minutes to desolder a chip, except when it has a ridiculous amount of pins or sits on too much flux.

Depending on what chip it is, it’s likely it has some flux underneath it. If possible try it with a hotter setting while trying to move the chip around carefully with tweezers.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Cristian Tavarez 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 134