Black screen even after changing bluetooth chip
I have a Wii that until recently was working fine. Had BootMii installed, booting from SD card. One day it stopped working - it would show the BootMii screen, but when it was supposed to load the home screen, I got just a black screen. Without the SD card, it would go straight to the black screen. Never got to the “health warning” screen.
I can go from BootMii to the Homebrew Channel, but I can’t load anything from it (black screen again).
I tried unplugging all the adapters, leaving everything unplugged for a few minutes, and trying again; this didn’t change anything.
I tried recovering the NAND from a backup in the SD card; this didn’t change anything.
I ordered a new bluetooth module, disassembled the Wii, and replaced the module; this didn’t change anything.
At this point I’m not sure what else to try. Any suggestions?
좋은 질문 입니까?
The other thing that happens sometimes is that with either the old or the new bluetooth chip, pressing the power button does nothing - it stays red, and if I keep it pressed, it does a clicking noise. By removing the card, it boots, but it goes to the black screen as usual. I suppose it's not very likely that the old bluetooth chip failed and the one I just bought is also failed?
Gabriel 의