Touch Bar dead won't come on after display replacement

Question

MacBook Pro 13" Touch Bar 2018

{A1706 / EMC3214}—2018년 7월 출시, 이 MacBook Pro 13”는 쿼드-코어 i5 및 i7 프로세서 그리고 Intel Iris Plus 통합 그래픽 포함.

203 질문 전체 보기

Jerry Johnson @jerryjohnso5037

평판: 11

1

게시일: 2020년 7월 27일

옵션

Touch Bar dead won't come on after display replacement

I replaced my 2018 13” MacBook Pro (A1989 EMC3214) screen which I bought on eBay stating its an exact match by a guy that sells them. Like a lot of these people on that site.

Questioned and stumped. I have No Touch Bar nothing lights up or functions and yes I did reset SMC & NVRAM. I also called Apple to remote in and went to Apple and I got no where.

I figured I was very careful 1st time ever to do this and I did not disconnect cable off touch bar but heard that Apple has a block on 3rd party replacements?

Is there anything on the replacement display that controls the touch bar?

Newbie is me for sure HELP ANYBODY I didn't have a ESC key is I assigned one on keyboard that was the biggest issue having the touch bar.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 2개

I didn't have a esc key so I assigned one, thats what I missed the most and volume

Jerry Johnson 의 2020년 7월 27일

This question was migrated from https://meta.ifixit.com/Answers.

iRobot 의 2020년 7월 27일

댓글 달기

답변 2개

I didn't have a esc key so I assigned one, thats what I missed the most and volume — Jerry Johnson
This question was migrated from https://meta.ifixit.com/Answers. — iRobot

Dan @danj 평판: 480.2k Self employed contract worker 35 329 971 · Answer 1 · 2020-07-27T15:20:19-07:00

가장 유용한 답변

Dan @danj

평판: 480.2k

Self employed contract worker

35

329

971

게시일: 2020년 7월 27일

옵션

I would go back to the supplier of your display as something doesn't sound right here. I've replaced a few 13" & 15" Touch Bar displays and I have not encountered messing up the touch bar. Are you sure you followed the guide correctly? did you disable Auto Boot before doing anything and well as disconnect the battery?

Did you use a proper ESD practices? Static can damage things!

The only issue I've faced is True Tone not working after replacing the display as the display was either the wrong one or one that was not calibrated before leaving the factory.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 2개:

disconnected cable from battery and screw and followed how to take off screen on a youtube video, I was carefully not to touch exposed circuit board but I was not grounded -wrist strap. I didn’t disable auto boot. Can I get this to work or is it Touch Bar dead?

Jerry Johnson 의 2020년 7월 29일

I also shut down computer and turn on with any key on keyboard.

Jerry Johnson 의 2020년 7월 29일

댓글 달기