Black display with backlight, everything else works
I replaced the logic board on my A1342 the other day, and this time everything works, except the internal display. It’s still giving me the black screen with backlight, although if you close it immediately after turning it on, it will show something on the external display. (I’ve tried with the old logic board, still nothing)
Is this an issue with the display itself or something else?
Edit - I should mention that I didn’t set up the computer when I wrote this, now I have and it functions as a normal MacBook would do when connected to another screen, only of course the main screen is dead.
좋은 질문 입니까?
댓글 3개
nagayoshi765 you got an external display working on it?
oldturkey03 의
@oldturkey03 yes - finally, but I also discovered the internal display won't display anything at all. No garbled lines this time however.
amatsuda 의
I set up 10.9 Mavericks on it (since I found my old 10.9 boot disk and the hard drive was empty) and otherwise it works fine with the second display, only of course I don't have the main screen.
amatsuda 의