주요 콘텐츠로 건너뛰기

Televisions made by the Chinese multinational electronics company, TCL.

263 질문 전체 보기

Can’t find the t-con on my TCL 55” - 55s423

Block Image

Where is the t-con located? Matched the model # and ordered the board. It doesn’t go anywhere and the back doesn’t appear to even have the t-con board.

Block Image

Block Image

Block Image

Block Image

Update (10/19/2020)

It would make sense that it’s connected to the main. But it’s just connected to the thin board at the bottom. Including a pic of the t-con I ordered. BTW- Austin, Tex here!

Block Image

Update (10/19/2020)

Up close of board.

Block Image

Update (10/19/2020)

Clearer pic of the board.

Block Image

Update (10/19/2020)

Clearer pic of the board.

Block Image

Update (10/19/2020)

Okay. This is a close-up of pic #3.

Block Image

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 2개

I am having the same problem. Did you manage to repair it?

My 55s425 has the same skinny board..... i just replaced the LED strips and to my surprise it only had two rows of LED strips inside (a total of 4 sections) .... all the newer designs now have twice as many rows and a separate T-Con board ..... but they probably run a LOT cooler as a result.....

댓글 달기

답변 2개

선택된 답변

It was integrated. There are three different setups for this particular model. This is the version 5 setup. Main board contains the T-con.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
가장 유용한 답변

@phonee the only place it can be is at the end of the ribbon cable from the main board. Take a couple of clear pictures of that board. If that is the LCD driver board (to far away and to unclear to determine this from this picture) then your T-con board is part of the main board. Post some good, clear, up close pictures.

해당 답변은 도움이 되었습니까?

점수 2

댓글 4개:

I updated with new photos.

From Austin here. See you’re from San Antonio. Howdy. I repair iPhones and this is new to me.

Hey. So it looks like image #3 shows the LCD driver board. Can you get a bit more from that particular board. If it is the LCD driver board that would mean your main board has an integrated T-con board. There just is no other place where it could be.

Just posted. It has to be integrated... Right?

댓글 달기

귀하의 답변을 추가하세요

Phone E 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 13

30일 전: 73

전체 시간: 2,662