주요 콘텐츠로 건너뛰기

The wi-fi only version of Apple's iPad Air, model number A1474. Available in Space Gray or Silver, it packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

299 질문 전체 보기

ipad air a1474 sleep lock button don't work,but turn on

hi dears

after change digitizer for ipad air 1rst model,all was fine when i test digitizer before installation.all work perfect.but after installation power button turn ipad on and off.but won’t sleep or wake ipadalso when ipad turn on its go to sleep directy after start.

i triedt lo lock ipad from home button accessibility,and its not work also from there.

hardware fix looking for if some expert here can help :)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

Hello, you have a faulty sleep/wake sensor. This is a solder component on the digitizer itself. It can be replaced, but it is much easier to just replace the digitizer again with a high quality part. I have had this issue with cheaper vendors before.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

hi dear

thanks for your answer, i wait to change the home button connector first and check again with new digitizer to see if its help.

will replay here when i get it done.

thanks so much

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Lasse ANB 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 5

전체 시간: 55