주요 콘텐츠로 건너뛰기

2018년 9월 21일 출시. Models A1920, A2097, A2098, A2100. GSM 또는 CDMA / eSIM 또는 nano-SIM / 64, 256, 또는 512GB / 은색, 금색 또는 스페이스 그레이. ("iPhone 10 S"로 발음합니다.)

398 질문 전체 보기

iPhone XS laging and restarting after 3mn

Hello,

I did a back glass replacement and after reassembling the phone. It is laging. I tried to do some troubleshooting

1- when i disconnect the back and front camera the phone works well with no lag

2- when i connect only the back camera the phone lags ( the camera is work but not a the first attempt )

3- when i connect only the front camera the phone lags ( and face id says “face not visible” )

4- when i connected both cameras, phone lags ( both cameras are working, but the flash doesnt )

5- For the restarting issue i think i damaged the charging port while removing the back glass. I read that in another forum

Please help. I dont know what else to do

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 3개

선택된 답변

Back Glass or Whole Housing replacements can suffer from the same issues, mainly damaged flexes or connectors. If the phone works fine without the cameras, then closely examine the camera flexes and connectors (and the equivalent connectors on the logic board.

Look for tears in the flexes, even the tiniest ones. Sometimes the connector pins get damaged or some surrounding components can be fully or partially dislodged. All of this inspection may require some magnification.

EDIT 2020-10-26

Take a closer at this flex, based on your picture below (https://ibb.co/g9qRMTj).

Block Image

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

I doublechecked the connectors and the flexs but i haven´t seen any damages. These are some macroshoots i took, maybe there can be helpful.

What about the restart after 3minutes ? Is It the Charging port which needs to be replaced ?

https://ibb.co/G2yvSwF

https://ibb.co/7kYG0Q4

https://ibb.co/D8gF0FP

https://ibb.co/F3nXKRQ

https://ibb.co/QJcmmXK

https://ibb.co/VWcXHDD

https://ibb.co/pR8S4CS

https://ibb.co/g9qRMTj

https://ibb.co/cCbscS9

https://ibb.co/GPqB8m9

https://ibb.co/wzyrhQ7

https://ibb.co/Kh1Bntb

https://ibb.co/H4vmPSY

https://ibb.co/9HXD2gs

I double checked the flex but it is not damaged. i took a better picture

https://ibb.co/N1WHX5W

댓글 달기

Hello Michel,

While the phone is on connect it to your pc run CoconutBattery app: https://www.coconut-flavour.com/coconutb...

If the design capacity shows value around 100mAh (normal value would be the thousands range ~2000-2658mAh)it would suggest you damaged either the battery connector or a tiny component around the connector. If that’s the case you would need a professional to fix it. It would help if you cold post pictures of the battery connector in question.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

Heloo Roman,

thank for your response. I don´t have a Mac but a Windows PC. I used 3UTools to check the Ah. It shows 2642mAh as designed capacity.

These are some pictures.

https://ibb.co/yVmM1Nf

https://ibb.co/m0x4VDt

https://ibb.co/TYgWYBq

https://ibb.co/yYcyFq2

댓글 달기

Did you figured the issue? Because I have the exact same issue.

I replaced the charging flex cable with new OEM and still the issue is there.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Michel Ngne 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 261