주요 콘텐츠로 건너뛰기

MacBook Air 11"의 2014년 4월 업데이트는 새로운 듀얼-코어 i5 및 i7 Haswell 프로세서를 장착하고 배터리 성능을 약간 향상하였습니다.

100 질문 전체 보기

Won´t sleep when close lid, faulty hall effect sensor?

The MacBook running newest MacOS Catalina won´t sleep when i close the screen/lid.

Tried reseting SMC and PRAM, also tried running a magnet along all edges with no effect. Running on original Apple SSD.

Wondering where the hall effect sensor is located on this model? Is it part of the I/O board as I’m suspecting this is faulty and needs replacing?

Could re-installing MacOS Catalina help? If I manually enter sleep and close the lid it´ll sometimes react once closed and wake up, this is the only scenario in which I seemingly am able to get a reaction from the lid sensor.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Apple loves moving things about! This series Hall sensor is located on the main logic board on the back side as you can see here:

Block Image

Pop the logic board out and inspect it for corrosion MacBook Air 11" Early 2014 Logic Board Replacement if you see anything take a nice sharp picture and post it here for us to see 기존 질문에 이미지 추가하기

iFixit 이미지

안내서

기존 질문에 이미지 추가하기

난이도:

아주 쉬움

2 - 5 minutes

MacBook Air 11" Early 2014 Logic Board 이미지

안내서

MacBook Air 11" Early 2014 Logic Board Replacement

난이도:

어려움

30 minutes - 1 hour

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Thanks for the picture. I’ve found the problem and it’s the transistor(?) that seems to have snapped/fallen off at some point. Can the individual transistor can be bought from somewhere? If not guess i´ll have to find a donor from a model that has the hall sensor on it’s IO board as I´m guessing it’s the same transistor type on different year models.

@wackster - Apple hasn't altered the design over the years so I do think you can salvage the Hall sensor from another board.

댓글 달기

귀하의 답변을 추가하세요

Marik 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 5

전체 시간: 235