주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2683 질문 전체 보기

Two phones, two batteries. Won't hold charge?

Greetings!

So I had two identical phones I wanted to replace both charging ports and batteries. Now that both replacements are complete neither will accept a charge? Both batteries had about 20% charge when I plugged them in for calibration. Lightning bolt showed they should be charging however the phone screen said charged? I watched both phones on good chargers dwindle down until they shut off. Next day they won’t turn on and I cannot find anything online about this issue. Might anyone have some insight into what may be happening?

Thank you in advance!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

가장 유용한 답변

Maybe it’s an issue with the replacement charging ports or batteries you installed. I would suggest trying the phones with their original parts to see if that’s the issue.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

Thank you for the reply Levi! I believe I may had a user error? I swapped the screens and checked all the internal plugs. No issues. I decided since I assumed the batteries should be fully charged I held down the hard reset buttons. After about 10 seconds the Apple logo appeared and everything was fine! Batteries are holding a charge and phones/charging ports working fine.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

DANA BENNETT 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 33