기기를 수리하세요 커뮤니티 상점

Repair guides and support for desktop computers produced by Asus including towers and all-in-one display PCs.

142 질문 전체 보기

옵션

VGA No Signal when Windows XP logo Appears

Hello guys ,I hope you are doing well! So I am trying to boot up an old pc (from 2006 to be exact) using a Samsung HDD with Windows XP installed. I have selected it to be the first one in boot priority. When it's booting its asking me which mode I want to enter (safe or normal).

Whatever I select , it tries to boot ( showing me the Windows XP logo) and immediately stops and a message saying VGA NO SIGNAL Appears.

Any ideas would be greatly appreciated :)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hi

What is the make and model number of the PC or the motherboard if it is a custom build?

Was the HDD with Win XP already installed, taken from another computer?

If so you will have troubles making it start when connected to a different motherboard as the hardware will be different and therefore the wrong drivers will be already installed in the OS.

This link may be of some help

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 2개:

So this is the machine : https://www.manualslib.com/manual/10347/...

And Yes I am using an external HDD (with the OS) from another PC.

의

Hi @GO4GAME

I know nothing about servers but looking at this link the OS may have to be newly installed on a HDD in the server and not be an existing installation from another PC but i may be wrong about that.

Also it appears that even then there may be problems. Maybe try a Linux install as suggested in the link

Sorry I can't help more with this

의

댓글 달기

옵션

Unplug the VGA, then Wait for a couple of minutes, and then reconnect the VGA cable to your computer and monitor . Plug the Power cable back to your computer and monitor. Turn on . Try using an external monitor.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

GO4GAME 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 184