기기를 수리하세요 커뮤니티 상점

The Sony Playstation 2 SCPH-790xx is the fourth revision of the Playstation2 slimline model.

11 질문 전체 보기

옵션

New PS2 Slim laser won't travel on rail.

I've installed a new laser in my PS2 Slim, but it hits a hard stop point halfway when traveling on the rail and won't read discs.

I have removed the solder blob, so the disc spins but the laser can only travel on the inner or outer portion of the rail and hits a hard stop when trying to move further. I've replaced two lasers before with no issue, this is a first for me seeing this issue.

Update (11/12/2020)

Block Image

Here’s an image of the bottom of the defective unit for reference. The new working laser I received didn’t have these.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

I looked more closely at the issue and found that on the return sensor for the new laser I received there were two metal tabs extending from the bottom. They weren’t very long but long enough to hit the ribbon when traveling out or back to center. I took and filed them down, but had other issues with the laser so I had the seller send another. Sure enough the new unit arrived the next day and didn’t have these two metal contacts. It’s like the new laser was from a completely different batch and just works great (without stopping halfway along the rail).

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Nick Jones 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 19

전체 시간: 1,136