기기를 수리하세요 커뮤니티 상점

4세대 iPhone. 수리는 간단하지만 앞면 유리와 LCD를 하나의 유닛으로 교체해야 합니다. GSM / 8, 16 또는 32GB 용량 / Model A1332 / 검정 또는 흰색.

2396 질문 전체 보기

옵션

What part do I replace for a sleep button that won't click?

My iPhone is out of warranty, and recently the Sleep/Power button no longer 'clicks' when pressed, and has stopped working. Is it the metal power button that needs replaced or the electronic switch that is part of the cable? Which part actually produces the 'click'? I can't see any parts between the cable and the button where the click would normally occur, so unsure which part I need to swap out!

Any help would be much appreciated!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 3개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

The button is just a...well...button. It doesnt make the clicking noise itself, but just allows you to conveniently push the tiny button buried inside the phone. You may have jammed the button actual button (the yellow bit on the cable). See if you can possibly unjam it. If the button seems to be operating freely, you need to replace the power and sensor cable.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

옵션

Buy a new cable.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

I repaired a power button on a 4 for a client who had dropped her iPhone on the button itself and it no longer "clicked", and it also cracked the screen. The button on the inside of the phone should have a tiny orange "nub" on it which produces the click. Sometimes they fall off so I removed the cable with the button assembly and saw that hers was still there, but it would not work. Also the assembly appeared to be bent at the midpoint so I straightened it best I could and put a couple layers of tape on the button to build it up a little more. I used a hole punch to make the tape pieces round, and they fit just right. After reassembling, the button worked satisfactory.... (iPhonesfixed)

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

David 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 5

전체 시간: 9,243