기기를 수리하세요 커뮤니티 상점

2018년 3월에 출시된 Apple iPad 6의 Wi-Fi 전용 버전입니다. 32GB 및 128GB 스토리지 옵션으로 제공됩니다. 9.7인치 레티나 디스플레이와 64비트 A10 퓨전 칩이 특징입니다.

150 질문 전체 보기

옵션

LCD not turning on after digitizer replacement.

My brother got an Ipad 6th generation A1893 for school

because of remote learning. He ended up cracking the screen pretty bad i i just replaced the glass. before taking off the LCD the ipad was dead, but when i pressed and held the power button the dead battery icon showed. took off the digitizer and replaced it and put back the LCD and nothing is coming up now. not even the dead battery icon, had it on the charger for 20

minutes and still nothing. tried pressing and holding the power button for 1 minute and nope. really stuck because my parents don’t want to pay $300 to get it fixed/replaced. double checked and all the cables and connectors are in right . nothing is broken or damaged.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Is it possible that the battery was connected when you replaced any of the parts. It’s critical that the battery be disconnected anytime you mess with any cables. That short cut may turn out to be the long way around. I would recheck all the connections again. Try using a magnifying glass to get a good look at the connecting points before disconnecting. You might find a cable isn’t properly seated. Good luck

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

LCD ribbon cable is probably just not seated in correctly. Unfortunately you'll have to take it apart again to repeat connection. Test it before you close it. Hopefully ribbon cable is not damaged.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Madison Crenshaw 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 178