주요 콘텐츠로 건너뛰기

2008년 10월 출시 / 2.4, 2.53, 2.66, 2.8 또는 2.93 GHz Core 2 Duo 프로세서

376 질문 전체 보기

Full disassembly, so I could mod my MBP case

Hey guys,

does anyone know how hard it is to fully disassemble all parts from the unibody case? I am asking because I want to try to anodize the case in a nicer color than grey ;)

Anyone who tried that already? Are there maybe glued parts which cannot easily be assembled back?

Thanks for help!

Sebastian

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

Can we get photos when you are done?

댓글 달기

답변 2개

선택된 답변

It is not hard but it is tedious. You must have a properly grounded static pad and do not get too aggressive it taking it apart because some of the cable ends are easy to break. When you get ready to treat the metal make sure you cover the black lining inside the case with tape. And as the track pad stays in the machine, be careful to tape it all off both sides. Also this will most likely void any warranty the machine may have. Be careful and take your time and it is not too bad. (FOR THE RECORD: I do not think this is a good thing to do as you could ruin the computer but it is yours to do as you wish)

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

nice answer +

댓글 달기

Well here's the teardown, you can take a look at what you're comfortable doing. However I don't know how good it is for the computer to anodize it another color.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

bbayer001 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 3,068