기기를 수리하세요 커뮤니티 상점

The Kenmore Elite HE3 is a washing machine by Kenmore.

669 질문 전체 보기

옵션

comes to spin, after just a few seconds like clockwork gets UL error

Sears Kenmore Elite. Replaced Shaft & Shock absorbers several months ago & cleaned. Very smooth compared to other washers over last 50 years we have had. Other than a very slight (nothing) clunk about every 5 seconds. Washes beautifully. Drains perfectly fine. Tub rotates & goes up & down manually. But when it comes to spin, after just a few seconds like clockwork gets UL error, even though it is spinning as smoothly as ever. What could be wrong with this thing?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개

The model number is Sears Kenmore Elite Oasis #110.28032701

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hi @dorry ,

Don’t know if this will be a help or not and I’m not 100% certain that it is the correct one but here’s the tech sheet for the washer.

Was thinking perhaps that if you used it to get into the diagnostic test mode for the washer that perhaps it may give another clue as to what is happening.

Apologies if you’ve already have it or if it is not the one for your model.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 4개:

@jayeff Thank you, we will give it a shot & see what we can come up with. Were you ever able to get the model number? I tried to provide it again, but not sure if the machine kicked it out again. I might could try writing it out if not, but just not the same as the numbers.

의

@dorry

I'm a moderator on this forum so I'm able to "see" all posts that have been deleted by the iRobot that users such as yourself cannot see ;-)

I reopened one of your deleted comments and moderated it as an update to your question so that it wouldn't be buried in the comments and be missed

The model number is now up in the "Updated" post to your question.

Also was wondering if the problem "may" be with the rotary position sensor.

The link is only to show where it is located and the approx.cost as there are other suppliers. Just search for "110.28032701 parts" to get results

According to the link it ".... helps to ensure the load of clothing stays balanced during the wash cycle.", but I was wondering if perhaps as the spin is more "robust" it may play a part with this as well and it may be losing"contact" with the stator so it thinks that the load is unbalanced or the machine is not level etc, although maybe I'm getting it mixed up with the OL code

의

@jayeff Thanks a billion. I am going to look at that too as soon as I can. Bogged down by work, etc. right now though Thank you for all your help & we hope that you have a nice new years celebration & a much better new year.

의

@dorry

Thank you.

All the best for 2021.

Stay safe and healthy

Cheers

의

댓글 달기

귀하의 답변을 추가하세요

Dave Crockett 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 3

전체 시간: 82