Cameras & FaceID not working after back glass removal

Question

iPhone X

2017년 11월 4일 출시. A1865, A1901. GSM 또는 CDMA / 64 또는 256 GB / 은색 또는 스페이스 그레이. ("iPhone 10"으로 발음합니다.)

1202 질문 전체 보기

rubenhak @rubenhak

평판: 25

1

게시일: 2020년 12월 30일

옵션

Cameras & FaceID not working after back glass removal

Folks, there was a catastrophe. I was trying to replace the broken rear glass on iPhone X. Used heat gun & soldering fan to heat-up the back and remove the glass. Removal was pretty hard and once complete neither of cameras (front & back), nor the face id are working. The guess is that the board got overheated. Tried to replace the rear camera in the neighborhood shop, but that didn’t help. The inductive charge got a little damaged, but I don’t think it can cause cameras to fail.

Is there a way to fix this? Would appreciate a help. I can do soldering if needed.

Thanks.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 2

댓글 달기

답변 1개

선택된 답변

Chris Stables @imicrosoldering

평판: 50.7k

8

14

101

게시일: 2020년 12월 30일

옵션

If you didn’t remove the parts before attempting the glass replacement they have probably become damaged. For someone who doesn’t do this for a living I would suggest you should have removed the:

· Screen.

· Logic board.

· Rear cameras.

· Front cameras.

· Charging dock.

The iPhone X has a lot of parts which have sensors. If these sensors encounter high temperature they will fail. Also the logic board has under-filled IC’s and if these become heated they will cause bridging to the pads.

Depending on the ios one faulty camera can cause the other not to work. If you can source another housing I would try the logic board in that.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 3개:

Yes, you're right. Though instructions on the kit did not mention any of those.

I have an option to get working phone with a tiny crack on the screen for a good price. Is there much risk on getting that one and swapping with my screen? Assuming everything else worked on the donor phone (face it, cameras, etc), would all the functionality continue working after screen swap?

rubenhak 의 2020년 12월 31일

@rubenhak Everything should work fine except true tone. For this to work you will need a screen programmer to transfer the screen info over to your screen.

Chris Stables 의 2020년 12월 31일

Oh, Apple made it infinitely complex. Why couldn't the board reprogram the true tone on boot?

Do you think missing TrueTone would be an issue trading in a phone to TMobile?

It turns out its also possible to restore true tone without the original screen as well.

https://youtu.be/JT5EpIbXs2I

rubenhak 의 2021년 1월 1일

댓글 달기

Yes, you're right. Though instructions on the kit did not mention any of those.

I have an option to get working phone with a tiny crack on the screen for a good price. Is there much risk on getting that one and swapping with my screen? Assuming everything else worked on the donor phone (face it, cameras, etc), would all the functionality continue working after screen swap? — rubenhak
@rubenhak Everything should work fine except true tone. For this to work you will need a screen programmer to transfer the screen info over to your screen. — Chris Stables
Oh, Apple made it infinitely complex. Why couldn't the board reprogram the true tone on boot?

Do you think missing TrueTone would be an issue trading in a phone to TMobile?

It turns out its also possible to restore true tone without the original screen as well.

https://youtu.be/JT5EpIbXs2I — rubenhak

iPhone X

Cameras & FaceID not working after back glass removal

답변 1개

귀하의 답변을 추가하세요