주요 콘텐츠로 건너뛰기

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4994 질문 전체 보기

Phone wont switch back on after hard reset to fix black screen

My iPhone 6 was working fine up until yesterday which was when I noticed my screen kept freezing and glitching(.multicolored lines flickering on the screen )then I would simply press the power button once to switch it off the back on again and it would work fine again for a moment or two before freezing again so I hard reset it and the problem was fixed . However this morning when I woke up I turned on my phone to check the time and I could see the backlight was on but the screen was black and there were short grey horizontal lines along the bottom of the screen .I switched it off thinking I was still dreaming but it was the same when I checked it again .So I tried to hard reset it and now it wont switch back on

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

I think you need to replace your screen with a new one, but before order a new screen you can open up the iphone and check if when you reseat the flex connectors the screen work properly.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

DesertStormer04 Gg 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 18