주요 콘텐츠로 건너뛰기

모델 A1106 / 1280x854 스크린 해상도

90 질문 전체 보기

Despite a wholsale parts change, screen is still dark.

I have a sick display on my 12" PB. Have changed the display cable, the inverter and still have an unresponsive display. Brightness will change from complete black to dark grey. External display works fine. Where do i go next.

NOTE LONG COMMENTS

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 18개

What machine are you running? What system?

Its a 1.5mhtz PowerBook G4 running tiger right now.

Give me the history of what it was doing before you started your replacements and where you got the parts.

Screen had suddenly quit after normal use, (word processing). Parts were form ifixit and there is no change after the recommended parts swap.

How did you diagnose that it was the screen?

댓글 13개 더보기

댓글 달기

답변 1개

선택된 답변

Just to jump in for the sake of clarifying, when you say you replaced the display cable, is that the display data cable or the inverter cable? If it's the display data cable, it shouldn't be responsible for a problem like this. Rather you would need to try replacing the inverter cable. If you have already replaced the inverter cable, it sounds like the LCD panel is bad.

(yes i have read all the comments! I just wanted to clarify that one point)

해당 답변은 도움이 되었습니까?

점수 0

댓글 3개:

Thanks for the jump in, I think thats where I'm headed next. is there a way to test it before I condemn it?

Thanks for your answers. That leads to Ben conclusion: bad LCD. To test the problematic LCD you have to connected it to a known working PB. Good luck with your repair and keep us informed.

Just replaced the lcd with a working one and still have the problem?

댓글 달기

귀하의 답변을 추가하세요

robodney 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 995