주요 콘텐츠로 건너뛰기

The DualShock 4 CUH-ZCT2 was announced in 2016 to replace the CUH-ZCT1 controller released in 2013. This controller is similar to the previous model.

264 질문 전체 보기

I accidently spilt isopropyl alcohol into my controller

while i was cleaning my analog stick i accidently spilt isopropyl alcohol into analog stick and now its not working but when i put it into charger it flashes so plz help

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 달기

답변 2개

선택된 답변

Hi @amrmohamed ,

Was the battery was still in the controller when you were cleaning the analog stick?

If so do not attempt to charge or to turn on the controller as this may cause more damage

Even Isopropyl Alcohol conducts electricity when it is still wet and hasn’t yet evaporated. If the battery was still connected then the liquid may have provided circuit paths for the current that were not in the controller’s operating design and this caused some damage.

You will have to open the controller and inspect for any obvious damage to the components.

Here’s the iFixit DualShock 4 CUH-ZCT2 repair guides that may help.

When cleaning electronic devices either make sure that there is no power available to the device or only use a cloth lightly moistened with IPA 99%+ to clean to avoid excess liquid from traveling over the circuit board.

Unfortunately these days with a lot of electronic devices the power switch is not a power isolating switch.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

While trying to fix stick drift I put disinfectant alcohol instead of isopropyl alcohol now my controller is not working is there a fix for this?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Amr Mohamed 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 13

30일 전: 69

전체 시간: 4,835